Paper ballots can be manually counted in different ways–sort by candidate and then count the ballots; stack the ballots into groups of 20 and 100 and then have counters mark tally sheets as they go through the stack one-by-one; and more.
Affordable technology–a simple digital camera hooked up to a projector–can beat all these methods on each of the four attributes of a good manual-counting method.
1. Ballot security.
Ballots must not be altered by the manual count. Sorting and stacking methods require the ballots to be handled several times, by several people, and moved around tables. When ballots are projected, only one person needs to handle the ballots, only once, and can keep them on one table, in full view.
In a manual count, accuracy is established with redundant counts—two or more people must agree on each vote, reconciling any disagreement. When counters make errors in sort-and-stack or tally-sheet methods, finding and reviewing the problem ballot can take a lot of time and ballot-handling. With projected ballots, everyone sees the same vote at the same time, so ambiguous votes can be reconciled when they are first encountered.
Faster methods of manual counting help to restrain costs, because labor is the biggest cost. Quicker counting also makes the task more pleasant for both counters and observers. Projected-ballot manual counts have accurately counted votes in one race at a rate of 100 ballots every four minutes, including time to stop to compare paired counters’ totals and resolve any differences. Depending on ballot design, two races could go just as fast.
The value of a manual count depends upon how much trust it produces in candidates and voters. In traditional manual-count methods, observers cannot see ballots well enough to verify for themselves that the votes are being counted accurately and honestly. When the ballots are projected, observers see exactly what the official counters see. In addition, because projected-ballot counts require no ballot-handling by the counters, observers can be drafted on the spot as official counters–powerfully counteracting any distrust.
A tally sheet completed in full view of all counters and observers serves as a record of the manual count.
Quick summary: A recount in this week’s Supreme Court race would be a good idea for everyone involved. Verifying accuracy is a necessity if we want to protect our right to self-government from errors, glitches, and fraud. Even the seeming winner, Brian Hagedorn, would be better off if a recount removes the shadow of doubt from his legitimacy as winner. But because our legislature, egged on by our county clerks, tightened the recount law so extremely, it’s unlikely we’ll get one.
* * *
April 5, 2019 – A statewide election decided by only 6,000 votes is frustrating for everyone. Accurate or not, it indicates no clear will of the people. Chances are last week’s Supreme Court race was determined by random events. Who got tied up at work and didn’t get to the polls? Who neglected to get a valid witness signature on their early ballot?
And of course, such a close result raises fears of manipulation.
I’ve been asked about what I think happened.
First, I can say with certainty that the vote totals are incorrect. Statewide results always are, not just on Election Night but even after the county clerks have certified them. Every recount always finds miscounts.
Few people know that the 2016 recount found at least 17,681 mis-tabulated votes, or 0.58% of the total, because news media highlighted only the change in the victory margin. That’s 1 miscounted vote for every 170 cast. In 2016, the errors were random—affecting all candidates—so correcting them did not change the outcome.
Why so many miscounted votes? Lots of reasons, caused by both man and machine. Our elections are administered by a temporary workforce, without serious IT expertise. Even the county clerks don’t work full time on elections. Most workers are only lightly trained and supervised; get no more than four days’ on-the-job experience every year; and work under enormous time pressure. Only in recounts do they examine their work to find out how well they did. They would have to be superhuman not to make lots of mistakes.
But back to this specific race. Were the miscounts bad enough to have identified the wrong winner? And were they random?
I see no obvious sign of hacked voting machines. When someone manipulates Wisconsin’s election computers to alter the outcome in a statewide race, they are most likely to mis-program the software for one or two of the big counties, and they will surely put the statewide result outside the recount margin.
But the unexpected results in this Supreme Court race came from northern Wisconsin, and the statewide result is so close that Lisa Neubauer can—if she can raise huge cash quickly—get a recount. If that was computer hacking, it took impressive effort (accessing several small counties’ systems) while also being incredibly clumsy (creating results that are subject to recount.)
If a mis-tabulation (either accidental or deliberate) flipped the outcome in this Supreme Court race, my nominee for the most likely culprit is mishandled early, absentee, and mail-in ballots.
The 2016 recount found widespread errors with absentee ballots, mostly officials rejecting envelopes they should have accepted and vice-versa. But there were other mistakes, too. In Dane County alone, the recount found more than 60 uncounted absentee ballots. Neither rejected nor cast, these ballots were simply overlooked on Election Day and later, during both the municipal and county canvasses.
So we know absentee and early ballots are often miscounted by mistake, and we know those mistakes are not noticed except in a recount. We also know that in elections as anywhere else, the best place to hide fraud is where no one looks for it, and where any oddities that are noticed are written off as human error.
So messing with absentee ballots would be a good way to manipulate a relatively small number of votes.
There are many ways to interfere with absentee, mailed-in, and early ballots. As we saw in North Carolina, you can intervene between the voter and the delivery of the ballot to the municipal clerk. (That’s one ‘hack’ that cannot be detected or corrected by a typical recount.)
Local officials can—must, in fact—exercise judgment (e.g., Is this handwriting legible?) when deciding whether to cast or reject an absentee ballot. And while they are exercising that judgment, they can see the name and address of the voter. That means they can make reasonable guesses about which candidate will get the votes if they decide the ballot can be cast. Implicit, unintentional bias almost certainly shapes some decisions; the effect could be much stronger with deliberate effort. Rarely does anyone review their judgments.
To be clear, I’ve seen nothing to indicate that such manipulation was done in this election or any other Wisconsin election, but it’s a fact that it could be done. A recount would clear that up for both those who suspect and those who deny any wrongdoing. If no recount occurs, we’ll just have to keep guessing.
But we are not likely to get a recount. For the past several years, the Legislature–urged on by the Wisconsin County Clerks Association–has tightened the recount law to make it nearly impossible to get a recount in a statewide race. Had an election held in April 2015 produced a victory margin of less than 0.50%, as this one did, Neubauer could have obtained a recount at no cost.
From the 2016 recount, we now know that a 0.58% error rate is a realistic expectation. So we can see why the old law, which made it easy to get a recount if the margin was 0.50%, was sensible. If unlike our legislators, we care about protecting our right to self-government against election errors, a recount is always wise when we could easily be declaring the wrong winner by mistake.
So we will all be well-served if Lisa Neubauer can quickly raise the cash—$2 million, based on the cost of the 2016 recount—that she’ll need to get a recount. The losing candidate is the only one who can buy a recount; our laws assume voters have no standing or interest in accuracy.
But neither she nor we should underestimate the effort needed to raise that much cash that quickly. To get the cash into WEC’s bank account by the deadline, she will need to raise it within about 60 hours of when WEC receives the last county’s official results. Jill Stein had a little longer to raise the money (legislators shortened the deadline after Stein showed it was possible), but this election is not drawing the sorts of national interest that helped Stein raise that much money that fast.
Having said all that, if the result in the Supreme Court race was ‘manipulated,’ my bet would not be on an outcome-flipping miscount, but on the success of a last-minute, under-the-radar, highly targeted, dark-money effort to motivate northern and rural voters to get out and vote for Hagedorn.
But as long as we allow that conduct to be legal (and we do), we cannot call it manipulation. If we want to put an end to that, we’re going to have to do more than complain about it. We’re going to have to fix campaign-finance laws. And to do that, we voters are going to have to get a constitutional amendment.
The Wisconsin Elections Commission met today, and I stayed for most of the agenda.
One agenda item had to do with fixing the snafus that caused a voter-registration list maintenance effort in 2017 to incorrectly ‘deactivate’ thousands of validly registered voters. (You may have heard such efforts described as ‘purges,’ a relatively pejorative term that is fitting whenever voter-list maintenance is used as a voter-suppression tactic.)
Among other things, so many voters were incorrectly removed from the registration lists that poll workers for the past several elections have had to work with two sets of poll books–the regular one for unaffected voters, and a supplemental list of voters who had been struck from the rolls but who would be allowed to vote if they showed up on Election Day and attested that they had not, in fact, moved.
There are dozens of reasons, it turns out, why State of Wisconsin computers got confused about whether these voters had moved. They have to do with things like registering a vehicle with your personal name but your business address, or buying a car for your college student in La Crosse and registering it there instead of where you vote. I won’t go into all the details. If you’re curious, you can read the staff report starting on page 72 of this document.
I spend a lot of time reading about election-integrity problems in other states. That means I read about a lot of skuzzy partisan machinations.
I also spend some time talking with local election officials. That, unfortunately, exposes me to much whining, excuse-making, buck-passing and “no law says I have to” attitude.
Here’s why the WEC discussion impressed me so much that I had to come home and write this blog post.
The discussion was pure, unadulterated problem-solving, start to finish. No one was looking for a partisan angle or opportunity. Not one single commissioner or staff member was whining. No energy was wasted on self-protective defensiveness, or on denying or minimizing the problems. I heard no attempts at buck-passing, no excuses.
Unlike what I hear when I talk to many local election officials about vote tabulation, no one at WEC was pointing out that statutes require them to do the work but don’t require them to do it right. It didn’t seem to cross any Commissioner’s mind to avoid their managerial obligation to detect, analyze, and correct problems until someone passes a law forcing them to do that, and paying them extra for it.
WEC commissioners and staff were straight-up committed to discovering the extent of the problems and what caused them, and to making sure they never happen again. Commissioners asked staff for hard data on error rates, and made sure that staff are not sending any more deactivation notices until the problems are fixed. Staff, for their part, were as committed to getting past problems corrected and future problems averted as the Commissioners were.
This is what responsible election administrators look like.
I wish all voters could have seen what I saw today. And I wish some reporter would write about it when good work gets done.
Posted by Karen McKim · November 25, 2018 10:31 PM
No city treasurer would refuse to check the accuracy of property-tax bills. No county executive would release a report on annual expenditures without double-checking its accuracy.
Most local officials don’t need anyone to pass a law telling them to check their work. They accept that as a basic managerial responsibility.
But the Wisconsin County Clerks Association is officially on record: They don’t want to.
And their work product is our election results.
The WCCA statement came in response to the Wisconsin Elections Commission’s September announcement that they were considering two election-security measures.
The Commission’s first proposal involved the only accuracy-checks the Commission has authority to order: audits of individual voting machines by municipal (not county) clerks. These audits are better than nothing, but they are limited to November elections in even-numbered years and check only a few random voting machines without confirming the winners in any race.
The Commission was considering ordering more machines audited than in previous years and requiring the audits to be completed before election results are declared final.
The Commission’s second proposal would move Wisconsin slightly in the direction of national election-security standards. The Commission was considering encouraging county clerks to perform audits of the type that if done widely, might confirm that Election-Night results had identified the right winner and enable clerks to correct the results if they had not.
WCCA’s response was swift, naïve, and irresponsible. The county clerks didn’t want the Commission to require, or even encourage, the county clerks to perform genuine election audits.
Perhaps sensing they are defending the losing side in a national trend (they are), the county clerks also described how they want to restrict this election safeguard:
They don’t wanna check accuracy until after they have certified final election results.
They don’t wanna check accuracy for any but the top race on the ballot.
And they want the State to pay extra if it even suggests they check accuracy.
I’m not making that up. The organization’s memo to the Wisconsin Elections Commission is reproduced, verbatim, below.
About delaying audits until after certification: The WCCA wrote that our paper ballots “should be treated like evidence and remain undisturbed” until after the clerks have certified the results. Join me in a prayer that the Trial Judges Association doesn’t have the same idea about the proper use of evidence. Imagine our courts refusing to look at evidence until after they’ve reached their verdict.
About auditing only the top race on the ballot: The WCCA wants to audit only the top race on the ballot, ever. This could be restated: “If you force us to protect the US Senate election, we will refuse to protect the Governor’s race.” Hackers are delighted to know ahead of time which races will be protected, and which will be on an honor system.
About making the state pay extra for accuracy: The WCCA clearly rejected the idea that accuracy is a normal managerial responsibility by demanding they be paid extra for it. Imagine a parks manager telling the county budget manager: “Here’s a statement of the user fees we collected. If you want me to make sure it’s right, you’ll need to pay extra.”
Straight-out lie: In a final Trumpian flourish, the memo’s author blatantly misrepresented the findings of a study by MIT, Harvard, and the UW Madison researchers (Learning from Recounts, 2017). The WCCA memo claimed the researchers had declared that “hand counts of election results are inherently inaccurate.” Compare that to the researchers’ actual words:
“…careful hand counting in a recount is the gold standard for assessing the true vote totals — in large part because of the greater focus on a single contest, more deliberate processing of ballots, and careful observation by campaign officials and other interested parties….”
* * *
Wisconsin statutes give the buck-stops-here responsibility for election results’ accuracy to the county clerks, and to no one else. Municipal clerks cannot verify results in federal, state, and county races; they have access to the ballots from only their own city, village, or town. The state elections agency is the legal custodian of no ballots at all; has only a few days after county certification before they must certify; and has no statutory authority to question results a county has certified.
We must insist the county clerks fulfill their responsibility. They have the paper ballots. They have the time. Modern election-audit practices would allow them to verify a few races on the ballot in just two or three days, while statutes allow them at least two weeks before they must certify the election. The only cost would be the hand-counters’ time at $10 or $12 an hour—a tiny fraction of the county’s elections-administration budget. They could randomly select just a few races for verification—just enough to deter election thieves in the races most liable to attract their interest.
And yet, collectively, they refuse.
Update: The Commission wisely ignored the WCCA’s whining and voted unanimously to encourage county clerks to start auditing during their canvass. And as the WCCA memo states, a few county clerks have begun voluntarily to incorporate hand-counted audits into their routine canvass procedures.
Every county clerk in Wisconsin received a memo on October 4, 2018 explaining the current nationwide move to election auditing and providing the clerks with instructions on how to get started.
Only voters, though, can make it happen. Voters who care about election security should contact their county clerk to find out whether their votes in future elections will be protected with hand-counted audits during the county canvass.
If not, the next election on February 19 will provide an excellent opportunity for your clerk to begin developing routine election-audit practices, since it will likely be a low-turnout election. Your county clerk has plenty of time before February to learn about the various methods of checking accuracy and work out his or her local procedures.
I’ve observed more than two dozen of these tests over the years. The ones I observed this week were typical. Even if you’re not an IT professional, I’ll bet you can pick out why these tests don’t protect Election-Day results from hacking—whether the hacker is an Internet cyber-crook or a corrupt voting-machine company insider.
Here, try it. Start by predicting what the hacker might try to do. First, do you think the hacker would make the malicious code miscount every single vote or only some votes?
You guessed ‘only some,’ and experts agree. When a blue-ribbon election-security task force convened by the Brennan Center for Justice worked out how a hacker would steal a statewide race in the imaginary State of Pennasota, they calculated that no hacker would likely alter more than 7.5% of the votes, or a little more than 1 in every 13. So if you want to detect hacking, your set of fake ballots—your ‘test deck’—should contain enough ballots to give each candidate at least 13 valid votes.
But Wisconsin municipal clerks typically create test decks with only one vote for each candidate—enough to catch only hacks that affect every single vote.
Second, do you suppose the hacker might instead allow the machines to count votes accurately all day, and then simply flip the candidates’ vote totals at the end of the day to give his guy the biggest total? You probably guessed yes, he might. So you would need to create a test deck that has a winner in each race, a different number of votes for each candidate.
Wisconsin municipal clerks’ pre-election test results typically contain a lot of ties–the same number of votes for each candidate in each race. Those test decks would not detect any vote-flipping hacks.
Finally, would the hacker’s malicious code kick in whenever the machine was turned on, or only on Election Day? This one is easy. Hacks would never trigger on any day other than Election Day.
This is the fatal flaw of pre-election testing as a safeguard against hacking. Hackers can program their code to trigger only when the calendar says it’s Election Day…or only when ballots are inserted at a rate typical of Election Day…or only when the machine has been operating continuously for more than eight hours…or only on some other telltale sign that real votes, not test votes, are being counted. As the Brennan Center Task Force report put it, trying to use tests like these to detect hacking would create a constantly escalating arms race between election officials trying to make the test look like a normal Election Day and hackers finding new ways to detect a test situation.
Many of Wisconsin’s pre-election tests do not hide the fact that the machines are running in test mode, not Election-Day mode. The photo at right is a close-up of the voter-verifiable paper trail from an AVC Edge voting machine, programmed by Command Central, being tested in Juneau County before the August 14, 2018 primary. Notice that the voting machine printed “PRE-LAT PAPER RECORD” at the top of the ballot. ‘LAT’ is the computer professionals’ term for “logic and accuracy testing,” a basic routine whenever software has been updated. (I don’t know why Command Central calls it “PRE-LAT”.)
This machine clearly knows it is counting test ballots, not real ones. Operating in test mode doesn’t render the test useless for things like catching innocent programming errors. But:
It is humbug for election clerks to fool themselves, or to fool the public, into thinking these pre-election tests provide any protection against hacking.
If we want to stop being fed humbug, we have to stop falling for it. If your local election officials tell you:
“Election results are protected by keeping the machines unconnected from the Internet,” tell them that you know that they have no idea about what happens to the software before it comes into their control.
“Election results are protected by federal and state certification,” tell them you know that the software has been copied and updated many times since it was certified, and that no one has ever or will ever inspect the software that will count your votes on Election Day.
“Election results are protected by the audits we already do,” tell them that audits completed only after the canvass cannot possibly protect results they have already declared final (‘certified’).
The solution: Contact your county election office. In Milwaukee County, that’s the Elections Commission; in other counties, it’s the county clerk. Tell them: “This voter is done with humbug. I know that one and only one safeguard can protect our final election results. Use our paper ballots to detect and correct any electronic miscounts before you declare election results final. Start this November.”
Don’t expect your county official to be stubborn; several are already planning to check accuracy before they certify the November results as final. Find out if yours is one.
But if your county officials are not now planning to begin auditing, don’t accept excuses. They got a memo on August 1, 2018 from the Wisconsin Elections Commission that made it clear: “A post-election audit is a tool that could be implemented to confirm that results have been tabulated accurately,” and “post-election audits of the results may be conducted prior to certification of the canvass.” The Commission even gave them basic instructions they can follow.
No more humbug about election security. Tell your county officials today: “Time’s up. Pre-certification audits. This fall.”
You can also help by donating to help Wisconsin Election Integrity get the no-humbug word out to voters, officials, and media through our 2018 publicity campaign.
Just a few tweaks to WECs’ audit policy could make Wisconsin’s November 2018 elections the most secure since we started counting our votes with computers.
July 24, 2018 — There’s still time before the November 2018 elections for the Wisconsin Elections Commission (WEC) to put a patch on the state’s biggest, most dangerous election-security hole. Up to now, local election clerks haven’t been checking the voting machines’ Election-Day accuracy before the certify election results. They could be doing that easily, quickly, and cheaply.
To audit voting machines’ November 6 output, neither WEC nor the local clerks need to spend an extra penny over what they already have budgeted for that election. The WEC has to change only one policy at their September 25 meeting.
But voters have to speak up–now. We must tell the WEC to revise their policy regarding the voting-machine audits for 2018, and order those audits to be completed in every county before election results are declared final. The WEC can be reached at (608) 266-8005 or by e-mail at firstname.lastname@example.org.
We have paper ballots. And local officials have up to two weeks after each election to review (‘canvass’) them to make sure the results are correct before they declare the official winners (‘certify’).
But Wisconsin election clerks seal them in bags on Election Night. During their review, they look at the poll tapes, but leave the ballots sealed. Then they certify. They swear the winners into office. Twenty-two months later, they destroy the ballots.
Perpetually sealed paper ballots do not deter hackers; they protect them.
About half the states require officials to do at least a little auditing of computer-calculated Election-Day results before they certify. But in Wisconsin, state law merely allows, but does not require, accuracy checks.
When I ask county clerks why they don’t check Election-Day accuracy, I get answers like, “If we had to count votes manually, that would defeat the purpose of using the machines,” and “If these machines were capable of miscounting, the State wouldn’t let us use them.” And “We did a recount before and didn’t find that election had been hacked.” Basically, the people who manage our voting machines don’t believe they can be hacked. Or that they can malfunction. Or that humans sometimes make programming errors.
We can’t have kind of naiveté among our voting-machine managers.
Since 2006, Wisconsin statutes have required the state elections agency to order voting-machine audits following November elections. That law, section 7.08(6) of the statutes, also orders local governments to do any audits the WEC tells them to do.
As is typical for laws like this, the statute leaves the details to the bureaucrats. How many voting machines to audit? When to audit? How to select the sample? Those decisions are left to the state elections agency.
But state elections officials have, before this year, denied the risk of an Election-Day hack. They were so confident, they didn’t think anyone needed to look for it. So they have never ordered the type of audits that would protect final election results from hackers.
But times have changed, and awareness of the complex risks–not limited to Russian hackers–has grown. WEC will be tweaking their voting-machine audit instructions soon, as they always do shortly before November general elections, and we voters have got to make sure they do it right this time.
We must demand two things.
First, the 2018 audit instructions need to tell local officials “Finish the audits during the county canvass so that you can correct any hacks or errors you might find.”
From 2006 through 2012, the State told local officials to wait to check accuracy until after they had certified the results. In 2014, state elections board members ordered their staff to stop prohibiting on-time audits. But they have never ordered timely audits—they merely stopped prohibiting them.
Second, we must demand that the WEC order audits of at least one voting machine in each county. More would be better, of course, but they’ve budgeted for only 100 voting-machine audits, and Wisconsin has 72 counties. So they can do this.
The sample selection method used in previous years is too odd to explain here. It has to do with making sure the sample contains five of each make and model of voting machine. The critical fact is that it has always left some counties out.
Wisconsin’s voting machines are, in all but a few counties, programmed at the county level. For the federal, state, and county races, the same vote-counting code is copied onto all the voting machines in a county. So there’s a good chance you could deter hackers by randomly selecting one machine in each county.
The best audit would, of course, include enough ballots to produce a statistically valid answer to “Are these the right winners?” But we’re down to the wire in 2018, and valid, respectable audits will probably need to wait until 2020. Until then, we need quick, better-than-nothing audits.
About cost: Funding for around 100 voting machine audits has already been budgeted–or should have been. Unless they increase the sample size, the WEC can order protective audits for the same price they are planning to pay for useless ones.
Just those two tweaks to WECs’ audit policy, and Wisconsin’s November 2018 elections will be the most secure in our state’s history since we started counting our votes with computers. They will be the first in which would-be hackers were put on notice: Any voting machine anywhere in the state might be randomly selected for an audit while there is still time to detect your mess and clean it up.
So: We must tell the WEC to order voting-machine audits in every county, and that they be completed before November 2018 election results are declared final.
This topic will be on their September 2018 meeting agenda, and they have asked for voters’ input.
May 31, 2018 — Ask any Wisconsin official whether our elections are secure and you’ll get this answer: “Our voting machines are never connected to the Internet; elections administration is decentralized; and the machines’ designs were approved by the federal and state governments.”
Go ahead—call your county clerk and ask. That is the answer you’ll get. He or she sincerely believes those three safeguards protect Wisconsin elections.
Here’s how many of the Wisconsin election officials’ three favorite safeguards made the list recommended by the national authorities: None.
Here’s why not:
Voting machines are and always will be programmed by fallible, corruptible humans. Anyone who develops or loads the software can manipulate the vote totals without the Internet.
You could hack into only one or two big counties’ voting machines and swing a statewide election. In fact, county control of the voting machines might make hacking easier by increasing the number of vulnerable entry points. Besides, it’s not really the local clerks who manage the machines anyway. It’s three companies: Command Central, Dominion, and the biggest one, ES&S, which supplies the software that counts about 2 of every 3 Wisconsin votes.
Federal and state approval of the voting machines’ original design cannot secure the machine that counts your votes. The software was copied and updated dozens of times before it reached the machine in your polling place. No one ever inspects or approves the software that actually counts your votes.
What does protect elections: Paper ballots and audits.
Wisconsin has paper ballots, but not a single county clerk—not one—looks at those ballots before declaring election results final.
As long as our ballots are packed up on Election Night and kept under seal until they are destroyed 22 months later, Wisconsin elections are no safer than if we were using paperless touchscreen machines.
That’s where Wisconsin’s decentralized elections can help to protect our elections. State law gives every county clerk two weeks after a general elections—and more if they request it—to review the Election-Night results to make sure they are correct. The county clerks and their boards of canvass are free to adopt any review method they choose—it’s up to them.
Any county or municipal clerk could, at any time he or she chooses, open the ballot bags and conduct a legitimate audit. It would be harder for municipal clerks, because they have only a week for review, and they certify only local races anyway. But county clerks have plenty of time to audit, and they certify the state and federal races—the ones most likely to be hacked.
Call your county clerk today and educate them. Tell them that the three safeguards they rely on are not really safeguards at all. Tell them to start—NOW—planning how they will verify the voting machines’ Election-Day accuracy after future elections. If your county clerk doesn’t know how, refer them to Securing the Nation’s Voting Machines: A Toolkit for Advocates and Election Officials, which has a good list of pointers and resources. Write to your local newspaper to make sure they cover this story.
Then, keep calling your county clerk until you get the answer Wisconsin voters deserve: “Yes, we will make sure your votes were counted correctly before we declare election results final.”
But the vote-counting system is separate. It resides on no computer that either of them can control, monitor, or inspect. It was outside their range of vision in 2016, and it’s outside their vision now. They don’t talk about voting-machine security because they don’t know.
Wisconsin’s vote-counting computers are controlled, protected, and monitored by our local election clerks and by three companies—ES&S, Dominion, and Command Central.
That’s all. No one else.
Local election clerks have exactly the level of IT sophistication you think they do. County clerks send our vote-counting software off to Nebraska or Colorado or Minnesota to be reprogrammed for each new election, with no way to notice if it comes back carrying malicious code. A few counties use an application supplied by those companies to reprogram the software themselves. They put a plastic seal on it when they’re done.
Wisconsin’s local election clerks will happily leave a service technician alone with a voting machine or the county’s election-management computer, with no way to notice if he installs malicious code or a wireless communications card. They put a plastic seal on the voting machines for Election Day.
Go ahead—ask them. They seal the software. They seal the machines. They seal the paper ballots that they could use—but don’t—to check the machines’ Election-Day accuracy.
And what about where the real danger lies—within the voting-machine companies? How well does their security guard against external hackers and corrupt insiders?
The companies themselves might not understand IT security. Professor Aviel Rubin of the Johns Hopkins University Information Security Institute checked with the major American voting-machine companies before the 2016 elections and discovered none employed “even one full-time trained expert in computer security.”
Congress, too, has been frustrated in its attempts to get straight answers about the companies’ security practices. When Congressman Ron Wyden tried to get answers from ES&S, he didn’t get a response from anyone with ‘security’ in their job title. Instead, a Senior Vice President for Governmental Relations replied, saying “At ES&S, security is the responsibility of not just one, but all who elect to work for our company.”
This governmental-relations expert reassured Rep. Wyden that ES&S had asked DHS “if they had knowledge of any such security issues involving ES&S to which they responded that they did not.” Well, whew.
ES&S—this company where every employee handles IT security and yet the vice president has to ask DHS to find out whether they’ve had a security breach—is the largest supplier of voting machines to Wisconsin. Just one of their machines—the DS200—counts more than 60% of Wisconsin’s votes, including votes from Milwaukee, Dane, Waukesha, and La Crosse Counties.
We cannot make the voting machine companies hire IT security staff before we elect a governor and a US senator in November.
And we cannot make our local election officials into IT sophisticates, ever.
But we can put an end to the honor system. That is, we can force our local election officials to use the paper ballots to detect and correct any miscounts before they declare election results final.
Our local election officials are the legal custodians of the paper ballots. They can unseal them anytime to count votes and make sure the voting machines counted right. At any time before the 2018 midterms, our local election officials could learn about results-audit practices already in use in other states and bring them to Wisconsin.
Do these three things today:
Contact WEC. Tell them to exercise leadership in getting county clerks to audit election results during the canvass. Tell them to use some of the federal HAVA funds; they’ll know what that is.
Contactyourlocalnewspapereditor. Tell him or her that you want to see local journalism take a sober look at voting-machine security right here in Wisconsin—and that doesn’t mean writing about plastic seals.
March 31, 2018 — Being a normally flawed human, I cannot resist starting this blog post with “As we have been saying for six years…”, Wisconsin’s “failure to carry out post-election audits that test the accuracy of election outcomes leaves the state open to undetected hacking and other Election Day problems.”
In speaking about Wisconsin, the report concludes: “To protect its elections against potential attack by sophisticated nation-states seeking to interfere in U.S. elections, Wisconsin should adopt robust post-election audits that have binding effect on election results.”
CAP researchers picked up on a feature of Wisconsin elections that in-state commentators have missed:
Problems with Wisconsin’s election security, along with possible solutions, are not visible unless you look beyond the state level and into the counties and municipalities.
Our state-level agency, the Wisconsin Elections Commission does not control the voting machines. They control only the systems that manage voter registration (WisVote) and that compile already-tabulated election results (the Canvass Reporting System, or CRS).
But the technology that counts Wisconsin’s votes is owned and operated by counties and municipalities–not the State.
It is the local clerks, not the WEC, who are responsible for pre-election protective security and for the managerial measures that would detect and correct any Election-Day miscounts.
Not only is pre-election security managed by non-IT professionals, Wisconsin’s entire vote-counting system lacks the ability even to detect miscounts, never mind correct them.
Wisconsin’s local election officials–bless their hearts–are not IT sophisticates. Asked about the threat of hacking, most will say something like what Sheboygan County Clerk Jon Dobson recently wrote to me: “The equipment is never connected to the Internet, (so) unless someone has figured out a way to hack through the unit’s power cord, our equipment is basically unhack-able.”
Clerks like Mr. Dobson are not being disingenuous. They genuinely believe that if they cannot see a way to hack the vote-tabulating technology, no one else can, either. Their trust in the voting-machine companies is complete and sincere.
For their education in IT security, Mr. Dobson and his colleagues rely almost entirely on the commercial reassurances of the voting-machine companies. They don’t seek the counsel of independent IT-security authorities who could explain the myriad number of ways an elections system can be compromised without Internet connection, particularly by insiders.
Wisconsin’s county clerks genuinely do not understand that elections software could be compromised by security lapses outside their vision or control–by the vendors, service companies, municipal clerks, and poll workers.
And as for Internet access, news hasn’t yet reached them from their counterparts in Pennsylvania, who found that a voting machine company had installed unauthorized remote access capability on their election computers without their knowledge–something that computer-security professionals had been warning of for years. Like the Wisconsin clerks, the Pennsylvania clerks had been blithely assuring reporters that voting machines were never connected to the Internet–without having checked. When I publicly asked him whether he ever checked Dane County’s machines for such unauthorized alterations, Clerk Scott McDonell said that the vendors had told him that would void the machines’ warranty so no, he doesn’t check. He is not fooling when he says he truly believes the machines to be so very secure that he can doesn’t have to check their accuracy before he declares election results final.
And that, fellow voters, is the level of IT naïvete that stands between motivated international hackers and our voting rights.
But we have to be realistic about what we can expect from local election officials. As Prof. Dan Wallach of the Rice University Computer Science Department explained, “You would not expect your local police department to be able to repel a foreign military power.”
What we canexpect of our local election officials–particularly our county clerks–is that they use the authority and resources already provided by Wisconsin law to manually check accuracy of the computer-tabulated vote totals before they certify election results final.
The only protection can come from using our paper ballots to check the machines’ Election-Day accuracy.
That’s the solution that 26 states already have in place, with varying degrees of rigor.
It’s the solution that we’ve been advocating for the past six years.
It’s the solution that the 2014 Presidential Commission on Elections Administration recommended.
And it’s the solution that the CAP report recommended for Wisconsin.
Wisconsin reporters and editors need to pick up on it now, too. They need to start asking county clerks the same hard questions about their security practices that they have been asking the WEC about theirs: How do you detect whether the technology worked as intended on Election Day? Do your security and recovery procedures meet national standards? What plans do you have in place for recovery if they fail?
Voters can ask, too. Pick up the phone. Call your county clerk. Get the facts right from him or her. Ask: “At the moment when you sign that certificate declaring the election results to be correct and true, what specifically have you done to verify that the voting machines counted correctly on Election Day?”
Among the 72 county election authorities in this state, not a one will answer: “I follow federal recommendations and conduct a valid post-election audit.”
June 14, 2017 — Over the past five years, I’ve read every commercial media story I could find regarding election technology. Sadly, that has not been a big job. Few reporters ever mentioned the risks, and those who did tended to interview only election officials. The typical news item would hint ‘some are concerned’ and then quote some official saying “We see no evidence of problems.” The question of whether the officials had been monitoring for problems–or whether they even knew how to–was left unasked and unanswered.
But recently, I am noticing progress in commercial news media’s coverage of the risks of elections technology. America’s reporters are catching up with millions of citizens and all IT professionals. They are realizing that computerized elections have risks, and that IT experts understand those risks better than election officials do.
That’s not the only recent improvement. Some reporters have noticed the solution, too. This morning I saw a news story in national mainstream media that went beyond hand-wringing over the risks and mentioned routine election verification.
Don’t get me wrong. We are still not seeing the sort of explanatory or investigative journalism that our elections deserve. But things are looking up. Commercial journalists have finally found the phone numbers of election-technology experts. In recent weeks, Reuters turned to the University of Michigan’s Alex Halderman and ABC News quoted the University of Iowa’s Douglas W. Jones.
Even a city reporter, Kristian Torres of the Atlanta Journal-Constitution, now knows to pick up the phone to interview Princeton’s cybersecurity expert, Edward W. Felten, when she has questions about elections technology. A local lawsuit there challenged Georgia’s failure to preserve an auditable paper trail.
But when the same opportunity (that is, renowned experts explaining the local angle on a topic of national interest) presented itself to Wisconsin journalists, they missed the opportunity. Last November, when three crème de la crème national experts testified in Dane County Court, Wisconsin reporters focused on mundane, predictable angles, such as the cost of the recount.
The currently trending issue–Russian hacking–might blow over, but I don’t think the improvement in reporters’ understanding of the larger issues will fade. National-beat journalists are truly waking up to this issue. So it’s only a matter of time before state and local journalists, too, bring some gravitas to their reporting on the topic.
I’m optimistic that we will see fewer formulaic stories approvingly quoting a clerk saying “It’s all good because we have no evidence of miscounts.” I’m looking forward to seeing more actual IT experts quoted.
And I can’t wait to hear Wisconsin officials’ answers after the next election when for the first time they face a reporter who asks, “Got it–no evidence of hacking. Now can you show us the evidence of accuracy?”